Canon Fb630u Drivers For Mac
Because Canon does not support any drivers for it on the new Windows VISTA operating system. Honestly, if I could continue to use this thing, I would but Canon just hasn't stepped up this badboy with an updated driver for Vista to recognize it, otherwise this thing would last me a very, very long time. CanoScan FB630U Driver Installations Procedures for Windows This is an on the internet setup software program to assist you to carry out preliminary configuration of your item on a COMPUTER (either USB connection or network link) and also to set up various software.
To install Canon CanoScan FB630U: Connect Scanner Canon CanoScan FB630U to PC If 'Add New Hardware Wizard' appears 1/ Choose 'Search For Driver' then click NEXT 2/ Deselect all boxes EXCEPT 'Specify Location' which should remain checked. 3/ In the box below 'Specify Location' type: 'c: canonscanner fb630uw2k' and click NEXT to complete the installation process.
If 'Add New Hardware Wizard' does NOT appear 1/ Click Start, Settings, Control Panel. 2/ Double Click SYSTEM, then click DEVICE MANAGER 3/ Locate a reference to your Scanner under 'Other Devices or Imaging Devices. 4/ Double click this reference to the scanner, then click 'Update Driver' or 'Reinstall driver' 5/ Choose 'Search For Driver' then click NEXT 6/ Deselect all boxes EXCEPT 'Specify Location' which should remain checked. 7/ In the box below 'Specify Location' type: 'c: canonscanner fb630uw2k' and click NEXT to complete the installation process. ---------------------------------------------------------------- ScanGear CS-U 5.3.2 ---------------------------------------------------------------- o Microsoft and Windows are registered trademarks of the Microsoft Corporation in the U.S. And in other countries.
O IBM and IBM PC/AT are registered trademarks of International Business Machines Corporation. O Other company names and product names may be trademarks and/or registered trademarks in their respective countries. ScanGear CS-U 5.3.2 Features ScanGear CS-U 5.3.2 (hereafter referred to as 'ScanGear CS') is a 32-bit TWAIN-compliant scanner driver for the Canon CanoScan FB630U or FB636U scanners. When this driver is selected from within a TWAIN-compliant software application program running under Windows, either the FB630U or FB636U can be used to scan image data. What You Need Required Hardware o CanoScan FB630U or FB636U Scanner. O USB port, Universal Serial Bus Specification Version 1.1 compliant o 80486 CPU or higher (Pentium 60 MHz or higher recommended) IBM or IBM compatible PC o 32 MB RAM (more recommended) o 5 MB of free disk space for ScanGear CS installation.
O Free disk space, at least 50 MB. The amount of space required depends on the scanning area and the Scan Mode or Resolution setting. (Color images scanned at higher resolution require more storage space.) o CD-ROM drive o Minimum requirement for monitor: 800 x 600 resolution, 256- color (higher resolution with TrueColor recommended) Required Software o Microsoft Windows 98 or Microsoft Windows 2000 o TWAIN-compliant application software 3.
Canon Driver Download
A General Tip on Usage Canon CanoScan FB630U o Run only one application at a time which uses ScanGear CS; do not open more than one application that uses the ScanGear CS scanner driver. Also, do not open ScanGear CS more than once to acquire an image in the same application. O If you scan a very large image at high resolution, some applications may determine that there is not enough disk space to scan and save the image and return an error. To install Canon CanoScan FB630U: Connect Scanner Canon CanoScan FB630U to PC If 'Add New Hardware Wizard' appears 1/ Choose 'Search For Driver' then click NEXT 2/ Deselect all boxes EXCEPT 'Specify Location' which should remain checked.
Canoscan Fb630u Driver Mac
3/ In the box below 'Specify Location' type: 'c: canonscanner fb630u' and click NEXT to complete the installation process. If 'Add New Hardware Wizard' does NOT appear 1/ Click Start, Settings, Control Panel. 2/ Double Click SYSTEM, then click DEVICE MANAGER 3/ Locate a reference to your Scanner under 'Other Devices or Imaging Devices. 4/ Double click this reference to the scanner, then click 'Update Driver' or 'Reinstall driver' 5/ Choose 'Search For Driver' then click NEXT 6/ Deselect all boxes EXCEPT 'Specify Location' which should remain checked. 7/ In the box below 'Specify Location' type: 'c: canonscanner fb630u' and click NEXT to complete the installation process.
